FREE SHIPPING — On all orders $100+
Showing 1–16 of 18 results
| Type: | Pin and Block Single |
| Series: | WXD Series |
| Bore Size: | max 10mm (Slightly More Than 3/8 inch) |
| Joint Diameter: | 16mm (5/8 inch) |
| Torque Rating: | 11.2 N.m (99.13 lb-in) |
| Overall Length: | 60mm |
| Maximum Misalignment Angle: | 45 deg |
| Material: | Steel |
| Finish: | Coated |
| Type: | Pin and Block Double |
| Series: | WX Series |
| Bore Size: | max 10mm (Slightly More Than 3/8 inch) |
| Joint Diameter: | 16mm (5/8 inch) |
| Torque Rating: | 11.2 N.m (99.13 lb-in) |
| Overall Length: | 80mm |
| Maximum Misalignment Angle: | 90 deg |
| Material: | Steel |
| Finish: | Uncoated |
| Type: | Pin and Block Double |
| Series: | WX Series |
| Bore Size: | max 12mm (Slightly Less Than 1/2 inch) |
| Joint Diameter: | 20mm (Slightly Less Than 13/16 inch) |
| Torque Rating: | 22.4 N.m (198.26 lb-in) |
| Overall Length: | 90mm |
| Maximum Misalignment Angle: | 90 deg |
| Material: | Steel |
| Finish: | Uncoated |
| Type: | Pin and Block Single |
| Series: | WXD Series |
| Bore Size: | max 12mm (Slightly Less Than 1/2 inch) |
| Joint Diameter: | 20mm (Slightly Less Than 13/16 inch) |
| Torque Rating: | 22.4 N.m (198.26 lb-in) |
| Overall Length: | 64mm |
| Maximum Misalignment Angle: | 45 deg |
| Material: | Steel |
| Finish: | Coated |
| Type: | Pin and Block Double |
| Series: | WX Series |
| Bore Size: | max 14mm (9/16 inch) |
| Joint Diameter: | 25mm (About 1 inch) |
| Torque Rating: | 45 N.m (398.28 lb-in) |
| Overall Length: | 112mm |
| Maximum Misalignment Angle: | 90 deg |
| Material: | Steel |
| Finish: | Uncoated |
| Type: | Pin and Block Single |
| Series: | WXD Series |
| Bore Size: | max 14mm (9/16 inch) |
| Joint Diameter: | 25mm (About 1 inch) |
| Torque Rating: | 45 N.m (398.28 lb-in) |
| Overall Length: | 80mm |
| Maximum Misalignment Angle: | 45 deg |
| Material: | Steel |
| Finish: | Coated |
| Type: | Pin and Block Double |
| Series: | WX Series |
| Bore Size: | max 18mm (Slightly Less Than 3/4 inch) |
| Joint Diameter: | 32mm (Slightly More Than 1-1/4 inch) |
| Torque Rating: | 71 N.m (628.4 lb-in) |
| Overall Length: | 130mm |
| Maximum Misalignment Angle: | 90 deg |
| Material: | Steel |
| Finish: | Uncoated |
| Type: | Pin and Block Single |
| Series: | WXD Series |
| Bore Size: | max 18mm (Slightly Less Than 3/4 inch) |
| Joint Diameter: | 32mm (Slightly More Than 1-1/4 inch) |
| Torque Rating: | 71 N.m (628.4 lb-in) |
| Overall Length: | 92mm |
| Maximum Misalignment Angle: | 45 deg |
| Material: | Steel |
| Finish: | Coated |
| Type: | Pin and Block Double |
| Series: | WX Series |
| Bore Size: | max 22mm (Slightly Less Than 7/8 inch) |
| Joint Diameter: | 40mm (More Than 1-1/2 inch) |
| Torque Rating: | 140 N.m (1239.1 lb-in) |
| Overall Length: | 164mm |
| Maximum Misalignment Angle: | 90 deg |
| Material: | Steel |
| Finish: | Uncoated |
| Type: | Pin and Block Single |
| Series: | WXD Series |
| Bore Size: | max 28mm (About 1-1/8 inch) |
| Joint Diameter: | 50mm (About 2 inch) |
| Torque Rating: | 280 N.m (2478.21 lb-in) |
| Overall Length: | 138mm |
| Maximum Misalignment Angle: | 45 deg |
| Material: | Steel |
| Finish: | Coated |
| Type: | Pin and Block Double |
| Series: | WX Series |
| Bore Size: | max 28mm (About 1-1/8 inch) |
| Joint Diameter: | 50mm (About 2 inch) |
| Torque Rating: | 280 N.m (2478.21 lb-in) |
| Overall Length: | 196mm |
| Maximum Misalignment Angle: | 90 deg |
| Material: | Steel |
| Finish: | Uncoated |
| Type: | Pin and Block Single |
| Series: | WXD Series |
| Bore Size: | max 35mm (Slightly Less Than 1-3/8 inch) |
| Joint Diameter: | 60mm (About 2-3/8 inch ) |
| Torque Rating: | 560 N.m (4956.42 lb-in) |
| Overall Length: | 182mm |
| Maximum Misalignment Angle: | 45 deg |
| Material: | Steel |
| Finish: | Coated |
| Type: | Pin and Block Double |
| Series: | WX Series |
| Bore Size: | max 35mm (Slightly Less Than 1-3/8 inch) |
| Joint Diameter: | 60mm (About 2-3/8 inch ) |
| Torque Rating: | 560 N.m (4956.42 lb-in) |
| Overall Length: | 252mm |
| Maximum Misalignment Angle: | 90 deg |
| Material: | Steel |
| Finish: | Uncoated |
| Type: | Pin and Block Single |
| Series: | WXD Series |
| Bore Size: | max 22mm (Slightly Less Than 7/8 inch) |
| Joint Diameter: | 40mm (More Than 1-1/2 inch) |
| Torque Rating: | 140 N.m (1239.1 lb-in) |
| Overall Length: | 116mm |
| Maximum Misalignment Angle: | 45 deg |
| Material: | Steel |
| Finish: | Coated |
| Type: | Pin and Block Single |
| Series: | WXD Series |
| Bore Size: | max 42mm (Slightly More Than 1-5/8 inch) |
| Joint Diameter: | 75mm (About 3 inch) |
| Torque Rating: | 560 N.m (9912.84 lb-in) |
| Overall Length: | 244mm |
| Maximum Misalignment Angle: | 45 deg |
| Material: | Steel |
| Finish: | Coated |
| Type: | Pin and Block Double |
| Series: | WXD Series |
| Bore Size: | max 42mm (Slightly More Than 1-5/8 inch) |
| Joint Diameter: | 75mm (About 3 inch) |
| Torque Rating: | 560 N.m (9912.84 lb-in) |
| Overall Length: | 336mm |
| Maximum Misalignment Angle: | 90 deg |
| Material: | Steel |
| Finish: | Uncoated |
HZCDuniversal offers a range of universal joints, including single and double configurations, with either friction or needle bearings.
Single universal joints consist of two yokes and a trunnion assembly, allowing for use in confined spaces and angular misalignment up to 45°. Double universal joints have two yokes, two trunnion assemblies, and a center yoke, enabling larger gaps between shafts, parallel misalignment, and angular misalignment up to 90°.
HZCD’s universal joints are manufactured from high-grade alloy steel for high strength or stainless steel for corrosion resistance. They are precision-machined, selectively heat-treated, and utilize ground components to achieve tighter tolerances, better performance, and longer life compared to standard universal joints.
The universal joints are available with or without keyways, in bore sizes ranging from 3/16″ to 2″, 5mm to 35mm, or with machinable bores for custom applications. Inch-to-metric conversion couplings and step bores are offered by special order. Boot covers are also available to extend the lifespan of the universal joints.
All HZCD universal joints are manufactured in Guangdong, China.